Expert Answers about Backpack Blower Racks

• Can the Back Pack Blower Be Locked to PackEm Rack for Open Utility Trailers # PK-6-OP1
• The PackEm Rack for Open Utility Trailers, part # PK-6-OP1 uses a backpack blower holder that is designed to securely grip your blower at its grab handle. Simply hang your blower from the hook and then fold down the integrated steel arm. Once the arm is properly positioned over the hook, you can lock it in place with one of the included keyed-alike padlocks. If you have a STIHL BR420 model backpack blower you will need to purchase an additional adapter for it to be used on the PackEm Rack....
  view full answer...


• How Does the Rackem Backpack Blower Adapter, # RA-STIHL Assemble and Attach to Rack # RA-4
• The plastic tube is slit down the middle and wraps around the frame or handle on the STIHL BR550 or BR600 Blower. The large hole on the top of the Rack'em Backpack Blower Adapter, # RA-STIHL, goes on the hook of the Back Pack Blower Rack, # RA-4. One threaded end of a u-bolt goes through the small round hole, while the other threaded end goes through the long oval hole. You do the same with the other u-bolt. On the other side of the plate, the u-bolts go through the small rectangular plates,...
  view full answer...


• Can The Pack'Em Rack For Open Utility Trailers Be Installed In A Truck Bed
• Yes you could install the Pack'Em Rack for Open Utility Trailers - Holds 3 Trimmers # PK-6-OP1 in the bed of your truck technically, however it will require you to drill into your truck to install. If you're okay with that, and have the space, then yes you can absolutely install this in the bed of your truck. This kit comes with 1 lockable backpack blower rack, 2 beverage cooler rack, 1 trimmer line rack, and 3 keyed alike padlocks. Attached is a review video for you to checkout as well.
  view full answer...


• Is Pack'Em Rack for Open Utility Trailers A Universal Rack
• The Pack'Em Rack for Open Utility Trailers, part # PK-6-OP1 is a universal design and will work with many different model of tools. Adapters are required for certain model blowers. If you have a STIHL 420 you will need PA-STIHL420. If you have STIHL 340, 350, 550, or 600 you will need part # RA-STIHL.
  view full answer...


• Recommended Nuts and Bolts to Install the PackEm Rack for Utility Trailers # PK-6-OP1
• The installation instructions for the call for grade 8 bolts with matching lock nuts and washers. The size will largely depend on the trailer that is getting the rack installed onto. Pack'em usually recommend 5/16 inch by 1-1/2 inch bolts. I attached an install video for this rack for you to check out also.
  view full answer...


• Is There an Install Video for the Pack Em Rack for Open Utility Trailers, # PK-6-OP1
• I attached an install video down below the product links that shows the part # PK-6-OP1 being installed on a trailer similar to yours for you to check out. The install instructions call for Grade 8 nuts and bolts. The specific hardware you will need will be relative to your install setup.
  view full answer...